Sawtooth effect
In powder coating, the sawtooth effect can occur if the applied powder is not evenly distributed on the surface or if it does not completely melt and spread evenly during the heating process. This can result in the coating having an uneven, jagged surface, similar to the teeth of a saw.
The sawtooth effect in powder coating can be caused by various factors, including inadequate surface preparation, uneven application of the powder, incorrect powder particle size or inaccurate temperature settings during the heating process.
To minimize the sawtooth effect in powder coating, careful surface preparation is crucial, including cleaning, degreasing and possibly roughening to ensure better adhesion of the coating powder. Uniform application of the powder using suitable spraying or dipping techniques is also important.
Additionally, it is important to use the correct temperature and time parameters during the heating process to ensure that the powder melts completely and spreads evenly over the surface without burning or causing unwanted distortion. Optimizing these parameters can help to achieve a smooth, even paint finish without the annoying sawtooth effect.
Back to listThis definition is taken from the surface technology encyclopedia from Surface Technology Online. You can find many more technical terms from the surface technology industry in our lexicon overview.
Would you like to add technical terms to the surface technology encyclopedia (also with a mention as author)? Please contact us by mail or phone to discuss further details.