Umicore Introduces Nickel-Free IGEPIG Process in Europe

Created by OM GalvanizeUmicore
Umicore Printed Circuit Board Coating: Nickel-Free IGEPIG Process
The nickel-free IGEPIG process enables the plating of printed circuit boards with trace spacing of less than 20 micrometers without unwanted deposits or bridging (Image: Umicore)

Umicore Electroplating is introducing a nickel-free IGEPIG process for printed circuit board plating in Europe. The plating system is particularly well-suited for high-frequency applications, ultra-fine conductor structures, and flexible copper substrates.

Umicore Electroplating is introducing the IGEPIG process, developed by Uyemura, as its exclusive distribution partner in Europe. The nickel-free final surface combines a gold seed layer with a palladium diffusion barrier and a final gold top coat. The process is particularly suited for electronics applications that require high signal integrity, very narrow trace spacing, or flexible copper substrates. As transmission frequencies rise and electronic assemblies become increasingly miniaturized, the choice of final surface finish continues to gain importance. Established plating systems such as ENIG and ENEPIG contain a nickel layer, which can become a limiting factor in certain high-frequency, ultra-fine-line, and flexible applications.

Nickel-Free Coating for High-Frequency and Fine-Pitch Applications

IGEPIG (Immersion Gold, Electroless Palladium, Immersion Gold) combines, in its standard configuration, a 20-nanometer-thick gold seed layer with a 100-nanometer-thick palladium layer and an 80-nanometer-thick gold top layer. The palladium layer acts as a diffusion barrier and suppresses copper diffusion into the functional gold layer. At high frequencies, nickel-containing intermediate layers can contribute to the attenuation of electrical signals due to nickel’s ferromagnetic properties. The nickel-free structure also offers advantages for very fine trace geometries. As part of process development to date, traces with spacings of less than 20 micrometers have been coated without unwanted deposits or bridging.

Nickel-Free Coating with High Solder Joint Reliability

The absence of nickel also makes IGEPIG an attractive option for flexible copper substrates. BGA shear tests demonstrated solder joint reliability comparable to that of ENEPIG under the tested conditions, even after thermal stress. For applications with lower requirements, Umicore offers DIG (Direct Immersion Gold) without a palladium diffusion barrier as an alternative. Both final surfaces can be produced in a 2-in-1 process concept using a single gold bath. This allows users to choose between IGEPIG and DIG depending on their requirements, without having to set up an additional gold bath.

Back
Advertisement

Contact details and information on the companies and institutions presented here can be found in our interactive surface technology industry directory.