Combat hazardous dusts with the new Sprintus CraftiX H safety vacuums
As of December 2022, Sprintus GmbH is adding two more certified safety vacuum cleaners to the CraftiX model range. With the CraftiX 35 H and 50 H, the company thus also covers dust class H including asbestos. The other four safety vacuums in the CraftiX model series serve to efficiently combat hazardous dusts in dust classes L and M.
Health-endangering fine dust must not be allowed to pollute the air we breathe under any circumstances, as this can lead to chronic lung diseases in the long term. The safety vacuums from Sprintus therefore extract hazardous dust directly at the power tool before it is released into the air. All six CraftiX models feature automatic filter cleaning, which is performed by air backflushing. Thanks to the patented cartridge filter, it ensures that dust is removed from the fine pores of the filter without leaving any residue. The two models CraftiX 35 H and 50 H are equipped with a patented HEPA 14 cartridge filter, which consists of two independent filter chambers. These are cleaned one after the other, which means that suction flow and suction power remain at a constantly high level even during cleaning. This allows sawing, drilling, cutting, milling and grinding operations to be carried out efficiently and safely without hesitation.
The six Sprintus CraftiX safety vacuums cover dust classes L, M and H with one model each with 35-liter and 50-liter container volumes. The new CraftiX 35 H and 50 H models, which are certified for dust class H and additionally as asbestos vacuums, can be used to safely extract not only dust in dust classes L and M but also, in particular, carcinogenic dusts, dusts containing pathogens and bacteria, and dusts containing asbestos. They feature antistatic equipment as standard and thus also extract large quantities of fine dust directly from the power tool without any problems. Thanks to the integrated warning device, the suction power is monitored. If the permissible volume flow is undershot, the user is warned by an acoustic and visual signal. This prevents increased dust exposure in the air breathed. In addition, the two new models have the same innovative features as the models for dust classes L and M. Among other things, the flat surface on the motor head with retractable carrying handle should be mentioned. Here, the optional adapter plate for tool cases can be mounted and locked in place, allowing tool cases from all common manufacturers to be attached to the CraftiX (L-Boxx, Systainer, metaBOX, Tstak Box, MAKPAC).