Weicon adhesive and sealant for thermo-lacquered components
With Weicon Flex 310 M HT 220+, the manufacturer of specialty chemical products Weicon has developed an adhesive and sealant that is suitable for areas and applications where high temperatures prevail and where components are thermally coated in the higher temperature range.
This newly developed adhesive from Weicon closes a gap in the field of elastic adhesives and sealants for bonding applications in which components are thermally coated in the higher temperature range. The high-temperature resistant 1-component SMP-based adhesive and sealant is fast-curing and elastic and is suitable for tolerance-compensating joints. Flex 310 M HT 220+ has a viscoplastic consistency and a very fast strength build-up. It has good initial adhesion, is moisture-curing and neutrally cross-linking. Once cured, the adhesive and sealant can be exposed to temperatures of up to +220 °C for approx. 30 minutes and up to +90 °C permanently.
It adheres to a wide variety of surfaces and is highly resistant to weathering and ageing. Flex 310 M HT 220+ is free from solvents, halogen, silicone and isocyanate. Weicon Flex 310 M HT 220+ is suitable for various industrial areas. It can be used in metal construction, tank and apparatus construction, ventilation and air conditioning technology, bodywork, container, wagon and vehicle construction.