Panacol introduces new water-resistant cyanoacrylate adhesive
Panacol presents its latest moisture- and water-resistant cyanoacrylate adhesive Cyanolit 290 WR. The acrylate-based instant adhesive impresses with its fast curing time and high adhesive strength on metals and thermoplastics such as ABS and PVC.
The Cyanolit 290 WR instant adhesive from Panacol is a solvent-free 1-component adhesive that cures within seconds due to the humidity in the air. After just a few minutes, the adhesive strength leads to substrate breakage on plastics and achieves tensile shear strengths of up to 16 MPa on metals.
The main feature of Cyanolit 290 WR is its reliable adhesion after several hundred hours in an ageing test at 85°C and 85% humidity. Here, the latest cyanoacrylate from Panacol still achieves more than 50% of its initial performance. Cyanolit 290 WR exhibits extreme media resistance, especially after storage in pure engine oil, isopropyl alcohol or water. Even after 500-1000 hours, no loss of tensile shear strength can be determined. This extreme chemical resistance in particular makes Cyanolit 290 WR an ideal adhesive for fast, reliable bonding between plastics and metals that may also be exposed to media. This newly developed Cyanolit 290 WR adhesive has been tested in accordance with DIN ISO 10993-5 and is therefore also suitable for use in medical devices or articles and wearables.